Paint Protection Film Clear Bra PPF Pre-Cut Decal kit for Tesla Model Y Doors

Description

PRE CUT CLEAR BRA PAINT PROTECTION FILM FOR: TESLA MODEL Y (2020-2021)
PRE CUT KIT COVERAGE: 4 Full Doors + Door Handles
Designed to protect automotive paint on fenders, bumpers and deck or side skirts.
High Quality, German made ORAFOL Brand.
6 mil Clear Gloss PVC Laminate/Paint Protection Film.
5 Year outdoor durability.
Wet application is recommended when installing as a paint protection film, dry if used as a laminate.
Great for flat to moderate curved surfaces.
Reverse Wound with liner side facing out to prevent scratching of the laminate surface.
Uninstalling Oraguard 270g will not damage your vehicle's paint.
Each piece of the PPF kit is precisely cut to perfectly fit your vehicle. (TESLA Y - 2020-2021)
Our PPF kits are cut to order and may take up to 5 business days to ship out.
Tesla "Y" logo is cut out to help precisely line up the hood piece.
INSTALLATION INSTRUCTIONS
Procedure:
To achieve an optimum result, thoroughly clean the base before applying the ORAGUARD®- stone guard protective film.
Cleaning the base:
The vehicle base should generally be cleaned with conventional cleaning agents. Do not use substances attended to form a coating or sealing layer by means of nanotechnology on the base to be cleaned.
a) Clean the vehicle on the day before in a car wash tunnel (brush washing – no hand washing!)
b) Thoroughly check surfaces and edges for residues of preservative wax or polishing agents and remove them with industrial cleaning agents or silicone remover (isopropanol alone is not effective).
c) Finally, the surfaces to be bonded must always be cleaned with isopropanol. This will remove most efficiently all residues of previously used cleaning agents (spirit is not recommended).
d) Thoroughly dry the vehicle, use hot air blower to remove any residual moisture, particularly moisture trapped under rubber seals.
Note: Solvent residues owing to improper cleaning or a recent paint job may result in blisters forming between the film and the base and affect adherence. Make sure that films are only bonded to completely dry and hardened coating finishes. As a rule of thumb, allow a minimum drying period of three weeks.
How to correctly apply ORAGUARD® Stone Guard Film - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]